SPH-W6000 successfully flashed & unlocked

SAMSUNG SPH-W6000 (SHOW / ANYCALL)
BOOT MODE ONLY WHEN POWER ON DUE TO WRONG FIRMWARE UPGRADE

PRCEDURES:

download firmware in support first

insert usb cable from phone to pc ( in boot / download mode )

 ENTERING TO DOWNLOAD MODE COMBINATIONS :
- for phones with keyboard - press "4"+"Power ON"
- for phones with touchscreen - "Volume up"+"Volume down"+"PowerON" 

but in my case dati ng naka BOOT / DOWNLOAD MODE ang unit

*run SAM_1_14SD EXE
*select model (SPH-W6000)
*select comport
*connect port
*connect phone
*goto Flasher tab
*add firmware
*check skip boot option to akip boot flashing
*click write files & do job to start flashing
*unlock & repair NVM if needed
*done..

but in my case after flashing, the phone hang on logo only so i do the flashing prucedure again without skipping boot section (fullflashing)